Project Report on DECORATIVE LAMINATED SHEET (SUNMICA) [CODE NO.1644]

35000 INR/Piece

Get a Price/Quote

Product Details:

Click to view more
Share Your Product:

Request To Call Back Send Inquiry

Project Report on DECORATIVE LAMINATED SHEET (SUNMICA) [CODE NO.1644] Price And Quantity

Price 35000 INR/Piece
Minimum Order Quantity 1 Piece

Overlay Transparent melamine resin overlay for durability
Storage Instructions Store in cool, dry place away from direct sunlight
Product Name Decorative Laminated Sheet (Sunmica)
Water Absorption ≤ 1%
Code No. 1644
Fire Resistance Conforms to IS:2046 standards
Curing Temperature 140-150°C
Humidity Resistance ≤ 8% mass increase
Surface Finish Glossy, Matte, Suede, Textured
Decorative Layer Printed or solid colored paper impregnated with melamine resin
Abrasion Resistance ≥ 350 revolutions (Taber test)
Color & Design Wide variety available
Application Furniture, Wall Paneling, Countertops, Cabinets, Partitions
Thermal Stability Stable up to 180°C
Edge Bonding Excellent adhesion, chip resistant
Base Material Kraft Paper with Phenolic Resin
Flexural Strength ≥ 80 MPa
Thickness 0.5-1.0 mm (customizable)
Bonding Pressure 1200-1400 psi (approx.)
Toxicity Formaldehyde emission conforming to E1/E2 norm
Scratch Resistance High
Impact Strength ≥ 30 kJ/m²
Shelf Life Up to 24 months if stored properly
Packing Sheets packed with polythene and placed in wooden crates
Density 1.35-1.45 g/cm³
UV Stability Color fastness up to 6+ in Blue Wool rating
Standard Size 2440 mm x 1220 mm (8 ft x 4 ft)

Project Report on DECORATIVE LAMINATED SHEET (SUNMICA) [CODE NO.1644] Trade Information

Supply Ability 1 Piece Per Day
Delivery Time 2-3 Days
Main Domestic Market All India

Product Description

DECORATIVE LAMINATED SHEET (SUNMICA) [CODE NO.1644]

Decorative laminates are laminated products primarily used as furniture surface materials or wall paneling. It can be manufactured as either high- or low-pressure laminate, with the two processes not much different from each other except for the pressure applied in the pressing process. It is said that the first decorative High Pressure Laminate was produced by Marc-Anton Andr, who is the sixth generation of Johann Ludwig Andr, in 1959. High-pressure laminate According to McGraw-Hill Dictionary of Architecture & Construction, high-pressure laminates consists of laminates "molded and cured at pressures not lower than 1,000 lb per sq in. (70 kg per sq cm) and more commonly in the range of 1,200 to 2,000 lb per sq in. (84 to 140 kg per sq cm).

Cost Estimation

Plant Capacity                                         1000.00 Sheets/Day
Land & Building (3000 Sq.Mtr)               Rs. 4.10 Cr
Plant & Machinery                                   Rs.2.60 Cr
W.C. for 3 Months                                   Rs. 2.64 Cr
Total Capital Investment                        Rs.9.64 Cr
Rate of Return                                          25%
Break Even Point                                    53%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.